Releases¶
Upcoming release tasks:¶
-
Simplify branch/version structure -- just release from
master
(but will keepstable
tracking latest stable release plus doc updates) -
At some point (a couple of major releases after 2.3), remove the
-static
version from https://github.com/commercialhaskell/stackage-content/blob/master/stack/releases.yaml. People still using that will get an error, and we'll add a release note to switch over to https://get.haskellstack.org/stable/linux-x86_64.tar.gz instead (and note that www.stackage.org/stack is deprecated)
Version scheme¶
- Versions with an even second component are development versions (the
master
branch) - Versions with an odd second component are stable versions (the
stable
branch, or in arc/vX.Y
release candidate branch for not-yet-released versions) - Versions with an even third component (e.g. 1.6.2 and 1.7.0) are unreleased versions
- Versions with an odd third component (e.g. 1.6.1 or 1.7.3) and released versions
- Pre-release unstable binaries will be released with the date as the fourth component (e.g. 1.6.0.20171129)
- Release candidate binaries will be released with an even third component and and odd number as the fourth component (e.g. 1.7.0.1)
- Hackage-only dependency compatibility patch releases add a fourth patchlevel component (e.g. v1.7.3.1, in the
release
branch) - All branches except
release
(which matches exactly the most recent release) must have an even third component (development) - Branches other than
stable
,release
, and arc/vX.Y
release candidate will always have a0
third component (e.g. 1.7.0).
Examples:
1.7.0.0
: v1.7.x series pre-release branch (v1.7
branch)1.7.0.1
: release candidate for first release of v1.7.x series (v1.7
branch)1.7.0.2
: continuing development on pre-release branch1.7.0.3
: second release candidate for first release of v1.7.x series (v1.7
branch)1.7.1
: first release of the 1.7.x series (release
branch)1.7.2.0
: development for second release of 1.7.x series (stable
branch)1.7.2.1
: release candidate for second release of 1.7.x series (stable
branch)1.7.3
: second release of 1.7.x series (release
branch)1.7.3.1
: first hackage-only patch of 1.7.3 (release
branch)1.7.3.2
: second hackage-only patch of 1.7.3 (release
branch)1.8.0
: unstable development code (master
branch)1.8.0.20181004
: pre-release snapshot of unstable version (master
branch)
Pre-release checks¶
- Check for any P0 and P1 issues that should be dealt with before release
- Check for un-merged pull requests that should be merged before release
- Ensure
release
andstable
branches merged tomaster
- Check copyright dates, and update if needed
- Ensure CI matrices in docs (travis-complex, appveyor, azure) have current stackage snapshots and GHC versions (e.g. https://github.com/commercialhaskell/stack/pull/4565/files)
- Update the
stack-*.yaml
that uses anightly
snapshot to the latest nightly (go over the extra-deps too) and ensure the project builds and tests pass (e.g.stack build --stack-yaml=… --haddock --test --bench --no-run-benchmarks
) - Ensure integration tests pass on a Windows, macOS, and Linux. Do so by checking that the latest nightly build for the
master
branch succeeded in Azure DevOps (or kick one off manually if any significant changes were made since the last automated build).
Release preparation¶
-
In master branch:
package.yaml
: bump to next release candidate version (bump second component to next odd number, ensure third component is0
, and add patchlevel0
; e.g. from1.8.0
to1.9.0.0
). Be sure to also updatestack.cabal
(e.g. by runningstack build
).ChangeLog.md
- Check for any entries that snuck into the previous version's changes
due to merges (
git diff origin/stable HEAD ChangeLog.md
)
- Check for any entries that snuck into the previous version's changes
due to merges (
-
Cut a release candidate branch
rc/vX.Y
from master -
In master branch:
package.yaml
: bump version to next unstable version (next even second component with.0
third component (e.g. from 1.9.0 to 1.10.0). Be sure to also updatestack.cabal
(e.g. by runningstack build
).Changelog.md
:- Change the title of the existing Unreleased changes section to what will be the next final (non-RC) release (e.g.
v2.1.1
). -
add new "Unreleased changes" section: ``` ## Unreleased changes
Release notes:
Changes since vX.Y.Z:
Major changes:
Behavior changes:
Other enhancements:
Bug fixes:
```
-
In RC branch:
- Review documentation for any changes that need to be made
- Ensure all documentation pages listed in
mkdocs.yaml
(usegit diff --stat origin/stable..HEAD doc/
to look for new/deleted files) - Any new documentation pages should have the "may not be correct for the released version of Stack" warning at the top.
- Search for old Stack version, unstable stack version, and the next
"obvious" possible versions in sequence, and
UNRELEASED
and replace with next release version (X.Y.1
, where Y is odd).- Do NOT update the Dockerfiles in stackage/automated/dockerfiles yet; that will come later)
- Do NOT update templates in
.github
to point at the new release version yet!
- Search for old resolvers, set to latest resolver (e.g. in
doc/GUIDE.md
where it references the "currently the latest LTS") - Look for any links to "latest" (
latest/
) documentation, replace with version tag
- Ensure all documentation pages listed in
- Check that for any platform entries that need to be added to (or removed from) releases.yaml, install_and_upgrade.md, get-stack.sh, and doc/README.md, and get.haskellstack.org redirects.
- Review documentation for any changes that need to be made
-
For first release candidate:
- Re-do the pre-release checks (above section)
package.yaml
: bump to first odd patchlevel version (e.g.X.Y.0.1
). Be sure to also updatestack.cabal
(e.g. by runningstack build
).ChangeLog.md
- Rename the “Unreleased changes” section to the same version as
package.yaml, and mark it clearly as a release candidate (e.g.
vX.Y.0.1 (release candidate)
). Remove any empty sections.
- Rename the “Unreleased changes” section to the same version as
package.yaml, and mark it clearly as a release candidate (e.g.
- Follow steps in Release process below tagged with
[RC]
to make a release candidate
-
For subsequent release candidates:
- Re-do the pre-release checks (above section)
package.yaml
: bump to next odd patchlevel version (e.g.X.Y.0.3
). Be sure to also updatestack.cabal
(e.g. by runningstack build
).ChangeLog.md
: Rename the "Unreleased changes" section to the new version, clearly marked as a release candidate (e.g.vX.Y.0.3 (release candidate)
). Remove any empty sections.- Follow steps in Release process below tagged with
[RC]
to make a release candidate
-
For final release:
- Re-do the pre-release checks (above section)
package.yaml
: bump version to odd last component and no patchlevel (e.g. fromX.Y.0.2
toX.Y.1
). Be sure to also updatestack.cabal
(e.g. by runningstack build
).ChangeLog.md
: consolidate all the RC changes into a single section for the release version- Follow all steps in the Release process section below.
Release process¶
-
Ensure that the Integration Tests workflow on Github Actions passes the branch you are releasing. This will run automatically for
master
,stable
, andrc/*
branches (if another branch, you can run it manually).[RC]
-
Push signed Git tag. For final releases the tag should be
vX.Y.Z
(where X.Y.Z matches the version inpackage.yaml
from the previous step); for release candidates it should berc/vX.Y.Z.A
. e.g.:git tag -u <YOUR-GPG-KEY> -m vX.Y.Z vX.Y.Z && git push origin vX.Y.Z
.[RC]
-
Wait for Integration Tests workflow on Github Actions to complete for the branch you just created. This will create a draft Github release and upload the bindists (plus signatures and hashes) to it.
-
Edit the draft Github release, and
[RC]
- In the case of a release candidate, add
(release candidate)
to the name field and ensure that This is a pre-release is checked. - Add the Changelog to the description.
- For final releases (not release candidates), use e.g.
git shortlog -s origin/release..HEAD|sed $'s/^[0-9 \t]*/* /'|grep -v azure-pipelines|LC_ALL=C sort -f
to get the list of contributors and add it to the description. - Publish the Github release.
[RC]
- In the case of a release candidate, add
-
Upload
stack
package to Hackage:stack upload . --pvp-bounds=lower
. -
Reset the
release
branch to the released commit, e.g.:git checkout release && git merge --ff-only vX.Y.Z && git push origin release
-
Update the
stable
branch similarly -
Activate version for new release tag, on readthedocs.org, and ensure that stable documentation has updated.
-
Update get.haskellstack.org /stable and /upgrade rewrite rules with the new version and sync the application in ArgoCD.
- Test with
curl -vL https://get.haskellstack.org/stable/linux-x86_64.tar.gz >/dev/null
, make sure it redirects to the new version
- Test with
-
In the
stable
or, in the case of a release candidate,rc/vX.Y
branch:-
package.yaml
: bump the version number even third component (e.g. from 1.6.1 to 1.6.2) or, in the case of a release candidate even fourth component (e.g. from 1.7.0.1 to 1.7.0.2). Be sure to also updatestack.cabal
(e.g. by runningstack build
).[RC]
-
ChangeLog.md
: Add an “Unreleased changes” section (update “changes since” version):[RC]
``` ## Unreleased changes
Release notes:
Changes since vX.Y.Z:
Major changes:
Behavior changes:
Other enhancements:
Bug fixes:
```
- Update templates in
.github
to point at the new release version (X.Y.1
).
-
-
Delete the RC branch (locally and on origin). E.g.
git branch -d rc/vX.Y; git push origin :rc/vX.Y
. -
Merge any changes made in the RC/release/stable branches to master (be careful about version and changelog). It is best to do this by making a
ci/merge-stable-to-master
branch and waiting for CI to pass, then merging. If anything is complicated to merge, consider making it a PR and getting it reviewed rather than merging immediately. -
Announce to haskell-cafe@haskell.org; haskell-stack@googlegroups.com; commercialhaskell@googlegroups.com mailing lists, subject
ANN: stack-X.Y.Z
(orANN: first release candidate for stack-X.Y.x
), containing the release description from Github.[RC]
- For release candidates, also include a link to the Github Release (
https://github.com/commercialhaskell/stack/releases/tag/vX.Y.Z
) to download it.[RC]
- For release candidates, also include a link to the Github Release (
-
Update fpco/stack-build Docker images with new version
-
Under commercialhaskell/stackage/automated/dockerfiles, add
lts-X.Y/Dockerfile
(whereX.Y
is the latest stackage LTS version), containing (note where X.Z is the previous LTS version, and X.Y.Z is the newly released stack version)FROM $DOCKER_REPO:lts-X.Z ARG STACK_VERSION=X.Y.Z RUN wget -qO- https://github.com/commercialhaskell/stack/releases/download/v$STACK_VERSION/stack-$STACK_VERSION-linux-x86_64.tar.gz | tar xz --wildcards --strip-components=1 -C /usr/local/bin '*/stack'
-
Run
./build.sh lts-X.Y
and test that the new image has the new version of Stack (e.g.docker run --rm fpco/stack-build:lts stack --version
). -
Run
./build.sh --push lts-X.Y && ./build.sh --push --small lts-X.Y
to push the new image to the registry.
Build Linux static binary distribution with Nix¶
NOTE: We have switched back to Alpine Linux for building static binaries, done by CI. Leaving this section for future reference.
These instructions are tested on Ubuntu 16.04, but theoretically should work on any Linux distribution.
- Install nix (tested with v2.0.4 and v2.1.2, but should work with any)
curl https://nixos.org/nix/install | sh
-
Install and authenticate cachix (first two steps at https://cachix.org/ after signing up)
-
Add nh2's cache:
cachix use static-haskell-nix
NOTE: to clear cache index, use rm $HOME/.cache/nix/binary-cache-v5.sqlite*
(useful if someone else uploads new stuff to the cache and you want to use it right away). The recent narinfo-cache-positive
/negative-ttl
options might also help.
-
Check out stack commit to be released to
~/stack-release
(or elsewhere, in which case adjust following instructions) -
rm -f ~/stack-release/*.cabal
, to ensure it's regenerated -
clone https://github.com/nh2/static-haskell-nix recursively (last known to work with commit 725ceb2479637b3b3ab29298a1bc0e48c54984c9)
-
in
static-stack
directory, run (fromstatic-stack/README.md
):
$(nix-build --no-link -A run-stack2nix-and-static-build-script --argstr stackDir ~/stack-release)
-
Run integration tests against the static binary [TODO: improve this process by adding full support in
release.hs
or the integration tests for testing a binary built elsewhere]- In
~/stack-release
, runstack build --flag stack:integration-tests stack:stack-integration-test
- Copy binary built above to place where
stack build
normally puts thestack binary
(e.g.cp /nix/store/7vl1xvlbbqjvf864inz5vw7z2z1k4nmw-stack-2.1.0.1/bin/stack /home/vagrant/stack-release/.stack-work/install/x86_64-linux/custom-snapshot-for-building-stack-with-ghc-8.2.2-PyNP5UoO8Ott/8.2.2/bin/stack
; figure it out usingstack exec which stack
) - Run
stack exec stack-integration-test
- In
-
Copy the binary built above (in
/nix/store/XXX-stack-X.Y.Z/bin/stack
) to~/stack-release/_release/bin/stack-X.Y.Z-linux-x86_64/stack
(replaceX.Y.Z
with the version, and the/nix/store/*
path with that output at the end of the previous command) -
Package, sign, and upload to Github using stack's release script in the stack directory:
cd ~/stack-release
stack etc/scripts/release.hs --no-test-haddocks --binary-variant=static --build-args=--dry-run upload
(adding --build-args=--dry-run
ensures the binary you copied will be used rather than building a new one)
- Download the bindist from github and double check that the
stack
in it is actually static (useldd /path/to/stack
) and that--version
reports correctly (and not dirty).
Setting up a Windows VM for releases¶
These instructions are a bit rough, but has the steps to get the Windows machine set up.
Using Virtualbox¶
-
Download Virtualbox VM image: https://developer.microsoft.com/en-us/microsoft-edge/tools/vms/mac/
-
Launch the VM using Virtualbox and the image downloaded
-
Adjust settings:
- Number of CPUs: at least half the host's
- Memory: at least 3 GB
- Video RAM: the minimum recommended by Virtualbox
- Enable 3D and 2D accelerated mode (this makes programs with lots of console output much faster)
- Enabled shared clipboard (in VM window, Devices->Shared Clipboard->Both Directions)
Now continue to the General Windows setup subsection below.
Using ESXi¶
- Download the MSEdge on Win10 VM for VMWare (Windows, Mac).
- Unzip the file downloaded file
- Upload the VMDK file to the ESXi datastore
- SSH into ESXi CLI and run:
vmkfstools -i /vmfs/volumes/datastore1/win10-msedge/MSEdge-Win10-VMWare-disk1-ORIG.vmdk /vmfs/volumes/datastore1/win10-msedge/MSEdge-Win10-VMWare-disk1.vmdk -d thin
. This converts the disk to a format that is compatible with ESXi. You may have to runesxcli system module load -m multiextent
first (see https://www.virtuallyghetto.com/2012/09/2gbsparse-disk-format-no-longer-working.html).vmkfstools -X 80G /vmfs/volumes/datastore1/win10-msedge/MSEdge-Win10-VMWare-disk1.vmdk
. This makes the disk twice as large, which helps avoid running out of disk space.
- In the ESXi web UI:
- Create a new VM
- Give is 8192 MB of memory
- Give it 4 virtual CPUs
- Remove the default hard disk
- Add an Existing hard disk
- Select
/datastore1/win10-msedge/MSEdge-Win10-VMWare-disk1.vmdk
- Select
- Power on the VM
- In Windows settings:
- Search for "disk management"
- Extend the partition to take the whole disk.
- In all likelihood, you will want to search for "remote desktop" and enable remote desktop. Then you can connect to the VM using Microsoft Remote Desktop instead of using it from within the ESXi web UI.
- Search for "disk management"
- Create a new VM
Now continue to the General Windows setup subsection below.
General Windows setup¶
-
In Settings->Update & Security->Windows Update->Advanced options:
- Change Choose how updates are installed to Notify to schedule restart
- Check Defer upgrades (this avoids rebooting in the middle of the stack build)
-
In Settings->System->Power & sleep
- Disable turning off the screen or going to sleep when plugged in
-
Install msysgit: https://msysgit.github.io/
-
Install TortoiseHG: https://tortoisehg.bitbucket.io/download/index.html
-
Install nsis-2.46.5-Unicode-setup.exe from http://www.scratchpaper.com/
-
Install Stack using the Windows 64-bit installer
a. Restart any command prompts to ensure they get new
%STACK_ROOT%
value. -
Visit https://hackage.haskell.org/ in Edge to ensure system has correct CA certificates
-
Run in command prompt:
md C:\p md C:\tmp cd /d C:\p
-
Create
C:\p\env.bat
:SET TEMP=C:\tmp SET TMP=C:\tmp SET PATH=C:\Users\IEUser\AppData\Roaming\local\bin;"c:\Program Files\Git\usr\bin";"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin";%PATH%
-
Run
C:\p\env.bat
(do this every time you open a new command prompt) -
stack exec -- gpg --import
, and paste in the your GPG secret key (must be done usingstack exec
because that uses the right keyring for the embedded msys GPG; you can get the key from another machine withgpg --export-secret-keys --armor <KEY ID>
) -
Run in command prompt (adjust the
user.email
anduser.name
settings):git config --global user.email manny@fpcomplete.com git config --global user.name "Emanuel Borsboom" git config --global push.default simple git config --global core.autocrlf true git clone https://github.com/borsboom/stack-installer.git git clone -b stable --reference C:\p\stack-release https://github.com/commercialhaskell/stack.git stack-release cd stack-release stack install cabal-install
Setting up an ARM VM for releases¶
-
Use Scaleway to start ARMv7 and ARM64 VMs.
-
Select Ubuntu Xenial as the operating system
-
Install the correct version of LLVM:
sudo apt-get install -y llvm-3.9
(appropriate for GHC 8.2, might need different version for other GHCs) -
Symlink opt-3.X to
opt
:sudo ln -s opt-3.9 /usr/bin/opt
(adjust the version if you installed a different one above) -
Switch to gold linker:
update-alternatives --install "/usr/bin/ld" "ld" "/usr/bin/ld.gold" 20 update-alternatives --install "/usr/bin/ld" "ld" "/usr/bin/ld.bfd" 10 update-alternatives --config ld
-
Add swap space:
dd if=/dev/zero of=/swapfile1 bs=1024 count=4194304 mkswap /swapfile1 swapon /swapfile1 echo '/swapfile1 none swap sw 0 0' >>/etc/fstab
-
Install additional tools:
apt-get update && apt-get install -y unzip gpg
-
Import your GPG key (
gpg --import
and paste the private key) -
Git settings (adjust for your preferences/email/name)
git config --global push.default simple git config --global user.email "manny@fpcomplete.com" git config --global user.name "Emanuel Borsboom"
-
Install build tools and dependencies packages
sudo apt-get install -y g++ gcc libc6-dev libffi-dev libgmp-dev make xz-utils zlib1g-dev git gnupg
-
Install clang+llvm
NOTE: the Debian jessie
llvm
package does not work (executables built with it just exit with "schedule: re-entered unsafely.").The version of LLVM needed depends on the version of GHC you need.
- GHC 8.2.2 (the standard for building Stack)
wget http://llvm.org/releases/3.9.1/clang+llvm-3.9.1-armv7a-linux-gnueabihf.tar.xz && \ sudo tar xvf clang+llvm-3.9.1-armv7a-linux-gnueabihf.tar.xz -C /opt
Run this now and add it to the
.profile
:export PATH="$HOME/.local/bin:/opt/clang+llvm-3.9.1-armv7a-linux-gnueabihf/bin:$PATH"
- GHC 7.10.3
wget http://llvm.org/releases/3.5.2/clang+llvm-3.5.2-armv7a-linux-gnueabihf.tar.xz && \ sudo tar xvf clang+llvm-3.5.2-armv7a-linux-gnueabihf.tar.xz -C /opt
Run this now and add it to the
.profile
:export PATH="$HOME/.local/bin:/opt/clang+llvm-3.5.2-armv7a-linux-gnueabihf/bin:$PATH"
-
Install Stack
Binary: get an existing
stack
binary and put it in~/.local/bin
.From source (using cabal-install):
wget http://downloads.haskell.org/~ghc/7.10.3/ghc-7.10.3-armv7-deb8-linux.tar.xz && \ tar xvf ghc-7.10.3-armv7-deb8-linux.tar.xz && \ cd ghc-7.10.3 && \ ./configure --prefix=/opt/ghc-7.10.3 && \ sudo make install && \ cd .. export PATH="/opt/ghc-7.10.3/bin:$PATH" wget https://www.haskell.org/cabal/release/cabal-install-1.24.0.0/cabal-install-1.24.0.0.tar.gz &&&&& \ tar xvf cabal-install-1.24.0.0.tar.gz && \ cd cabal-install-1.24.0.0 && \ EXTRA_CONFIGURE_OPTS="" ./bootstrap.sh && \ cd .. && \ export PATH="$HOME/.cabal/bin:$PATH" && \ cabal update
Edit
~/.cabal/config
, and setexecutable-stripping: False
andlibrary-stripping: False
.cabal unpack stack && \ cd stack-* && \ cabal install && \ mv ~/.cabal/bin/stack ~/.local/bin